Banjo fitting – double end. Polished


Hand polished stainless double banjo. Recess lip on each side hides the gasket. Fits both 5/16inch and 3/8inch hose. Add banjo spacer 9086K for safe clearance on progressive linkages.


Part No. 9083K-P


Updating Wishlist


Banjo fitting – double end. Polished

The same as our 9082K-P fully polished single banjos, but with hose on both sides. For perfect proportions, we make them from big diameter stainless steel material with a recess lip on each side to hide the gasket and move the bolt head closer to the banjo. We kept the wrench surfaces short, knocked the corners off the hex and rounded the bolt head too. They’re sized to fit both 5/16inch and 3/8inch hose, with plenty of fuel flow guaranteed. Note: To provide safe clearance with a 3×2 progressive linkage, banjo fittings must be used with our stainless banjo spacers (9086K). Will not provide clearance for progressive linkages on 6×2 systems. All direct linkages clear OK without spacers.

Tech Center

Can I use 5/16in hard line on my 97s?

5/16 inch OD hard fuel line can be used on your 97 or BIG97, BUT you need the right Ford nut compression fitting ( 9581K-BIG ) and the 9564K-BIG Stromberg S-jet inlet valve. BIG97s already have the BIG S-jet. Read on!