Banjo fitting spacer


Moves banjo out one inch from fuel line to clear progressive linkages. Short wrench surfaces match banjo bolt. Fits single and double banjos and both 97 and BIG97.

Part No. 9086K


Updating Wishlist


Banjo fitting spacer

If you want to use banjo fittings with your 3×2 progressive linkage, these beautiful stainless steel spacers are exactly what you need. They move the fuel line out one inch from the fuel inlet providing instant clearance for the long centre progressive linkage arm – check out the pictures. Our proven superseat end has the correct 18 degree seat for Stromberg inlet fittings (original or S-jet). And the short wrench surfaces match the bolt head on the banjo.
Please note: The pictures are for illustration purposes only. 9086K covers just the spacer. Our banjos are available separately.

Tech Center

Can I use 5/16in hard line on my 97s?

5/16 inch OD hard fuel line can be used on your 97 or BIG97, BUT you need the right Ford nut compression fitting ( 9581K-BIG ) and the 9564K-BIG Stromberg S-jet inlet valve. BIG97s already have the BIG S-jet. Read on!